Apps Bootable USB Content Linux Desktop MultiBoot USB Windows 10

5 Tools to Create Multiboot USB – Linux and Windows ISOs Supported

multiboot usb

This text will probably be displaying you 5 instruments you need to use to create a multiboot USB. All of them can write a number of Linux distribution ISOs to USB flash drive and most of them may even write each Windows and Linux ISOs into the identical USB flash drive. These 5 instruments are:

  1. SARDU MultiBoot USB and DVD Creator
  2. MultiBootUSB
  3. MultiSystem
  4. YUMI (Your Common MultBoot Installer)
  5. WinSetupFromUSB

When you’ve got created a bootable USB with one other device, it’s beneficial that you simply reformat the USB flash drive with FAT32 or NTFS file system earlier than you employ the instruments talked about on this article.

1. SARDU MultiBoot USB and DVD Creator

SARDU is a freemium software program that can be utilized to create mutiboot USB and DVD.

Execs of SARDU:

  • Runs on Linux and Windows.
  • Can create a bootable USB containing each Linux and Windows ISO photographs (Windows 7, eight and 10)
  • A mess of ISO photographs for you to choose and obtain immediately from the SARDU software.
  • You’ll be able to add further ISO photographs to your USB with out destroying earlier ISO photographs within the USB flash drive.
  • Helps persistent information for Linux distributions
  • It can be used to burn a number of ISO photographs to DVD.
  • Helps each BIOS and UEFI firmware
  • Check your USB with QEMU.
  • SARDU makes use of the SYSLINUX boot loader by default, however can chainload to GRUB2 (premium function)

Cons:

  • The Linux model of SARDU doesn’t help Windows ISOs. So as to add Windows ISO picture to your bootable USB flash drive, you want to use the Windows model of SARDU.
  • the persistent information perform may cause this system turn into unresponsive when utilizing the Linux model. The Windows model works completely high-quality.

SARDU is a transportable software. To make use of SARDU, go to the official obtain web page and obtain the Linux model or Windows model, relying in your OS. I downloaded the Linux model.

multiboot usb

As soon as downloaded, open your file supervisor and go to the downloads listing. Extract the gzip archive.

multiboot usb creator

Go to the extracted listing and double click on the sardu_3 binary. The SARDU software program will begin.

multiboot usb linux and windowsFirst, agree to the license.

multiboot usb windows and linux

Then it can inform you to register an account. Registered customers can obtain up to date ISOs from SARDU database. In case you favor to use your personal downloaded ISO information, then select No.

best multiboot usb creator

On the left sidebar, there are four classes of ISO photographs

  • Anti-virus
  • Utility
  • Linux distributions
  • Windows

For instance, you’ll be able to click on the penguin icon and proper click on on an OS identify and choose search ISO. It will permit you to choose an ISO picture out of your arduous drive.

SARDU linux

After that, tick on the OS identify in order that the ISO picture can be written to USB flash drive.

SARDU MultiBoot Creator linux

It is going to additionally ask you if you’d like to allow persistent information. I discovered that if I select Sure, this system would turn out to be unresponsive, so I select No.

Then you’ll be able to proceed this course of with one other Linux distribution. After you choose all of your Linux distributions, insert your USB flash drive and click on the USB icon on the higher-proper nook to detect and choose your USB flash drive.

Subsequent, click on the large USB icon to create bootable USB.

SARDU MultiBoot Creator ubuntu

This course of can take a while should you chosen a number of ISO pictures.

SARDU MultiBoot Creator windows

So as to add Windows 7, Windows eight, or Windows 10 ISO pictures to your USB flash drive, you want to use the SARDU Windows model. Click on the Windows icon on the left bar, and choose the primary merchandise within the record. Select the ISO path, then tick on the identify.

SARDU windows 10 iso image

Please word that in case your pc makes use of UEFI firmware, you then want to allow the legacy BIOS help so as to boot your pc from the SARDU USB flash drive. As you’ll be able to see from the screenshot under, I can boot Linux or Windows ISOs from the SARDU boot menu.

how to make a multiboot usb drive

2. MultiBootUSB

MultiBootUSB is a complicated cross-platform software for putting in/uninstalling Linux working methods on to a single USB flash drives.

MultiBootUSB Execs:

  • Runs on Linux and Windows.
  • Free and open Supply. Launched underneath Common Public Licence (GPL).
  • You possibly can add further ISO photographs to your USB with out destroying earlier ISO pictures within the USB flash drive.
  • You’ll be able to take away an ISO picture out of your bootable USB flash drive.
  • Syslinux is used the default boot loader for making your USB Flash Drive bootable, can even chain load to GRUB2 if UEFI firmware is used.
  • Helps each BIOS and UEFI firmware.
  • Helps persistent information for distros which might be based mostly on Debian, Ubuntu and Fedora.
  • Check your ISO and USB with QEMU.
  • Has a command line interface.

Cons:

  • You want to write ISO photographs to your USB flash drive one after the other.
  • It doesn’t help writing Windows ISO picture to USB flash drive.

To make use of MultiBootUSB, go to the official obtain web page and choose the installer package deal in accordance to your OS.

  • Debian, Ubuntu customers choose the .deb package deal.
  • Fedora, OpenSUSE customers choose the .rpm package deal.
  • Windows customers choose the .exe package deal.

multiboot usb uefi

As soon as downloaded, open your file supervisor and go to the obtain listing and set up the package deal.

multibootusb ubuntu

After it’s put in, open it out of your software menu. To create a multiboot usb, first insert your USB flash drive. Subsequent, click on the Detect Drives button in MultiBootUSB and choose a partition on the USB flash drive.

multibootusb fedora

Then choose a Linux distro ISO picture out of your arduous drive. After that, you’ll be able to specify the persistent file measurement.

multibootusb persistent

Lastly, click on the Set up distro button to write the ISO picture to your USB flash drive.

As soon as that’s finished, you’ll be able to click on the Browse button once more to choose one other Linux distro ISO picture and click on the Set up distro button to write it to USB flash drive.

three MultiSystem

MultiSystem is Linux-solely software that permits you to create a multiboot Linux stay USB.

MultiSystem Execs

  • A mess of ISO pictures for you to choose and obtain instantly from the appliance.
  • Helps persistent information
  • Can create a bootable USB containing each Linux and Windows ISO pictures.
  • Check your stay USB in QEMU or VirtualBox

Cons:

  • Solely works in Debian and Ubuntu based mostly Linux distros.
  • You want to write ISO pictures to your USB flash drive one after the other.
  • The Linux distro ISO photographs written to the USB flash drive can’t be booted in UEFI mode, you want to allow legacy BIOS help so as to boot them.

To put in MultiSystem on Debian and Ubuntu based mostly Linux distros, open up a terminal and run the next command.

sudo apt set up software program-properties-widespread

Then add the official software program repository to your system.

sudo apt-add-repository ‘deb http://liveusb.info/multisystem/depot all essential’

Import the general public key.

wget -q -O – http://liveusb.info/multisystem/depot/multisystem.asc | sudo apt-key add –

Replace software program repository index and set up MultiSystem.

sudo apt replace

sudo apt set up multisystem

As soon as put in, open it out of your software menu. Then insert your USB flash drive and click on the refresh button in MultiSystem for it to detect your drive. (Make sure that the USB flash drive is mounted). As soon as it discover your USB flash drive, choose the system and click on affirm button.

multisystem ubuntu

It’ll ask you to enter your password.

multisystem bootable usb

Then it’s going to ask you if it’s Okay to set up Grub2 boot loader to your USB flash drive. Click on OK.

multisystem grub

As soon as that’s completed, click on the DVD icon to choose an ISO picture out of your exhausting drive.

MultiSystem windows 10

Then enter your password to write the ISO picture in your USB flash drive.

multisystem debian

Repeat this course of to add further ISO photographs to your USB flash drive.

four YUMI (Your Common Multiboot Installer)

YUMI can be utilized to create a Multiboot Bootable USB Flash Drive containing a number of working methods, antivirus utilities, disc cloning, diagnostic instruments, and extra.

YUMI Execs:

  • Helps each BIOS and UEFI firmware.
  • Can create a bootable USB containing each Linux and Windows ISO pictures (Windows 7, eight and 10)
  • A mess of ISO photographs for you to choose and obtain immediately from the appliance.
  • You possibly can add further ISO photographs to your USB with out destroying earlier ISO photographs within the USB flash drive.
  • Helps persistent information for Linux distributions.
  • You possibly can take away an ISO from USB flash drive.

Cons:

  • There’s no Linux model, though you possibly can attempt operating YUMI on Linux via WINE.

YUMI could be downloaded from the official obtain web page. There are two model of YUMI: one is for BIOS system and the opposite is for UEFI system. YUMI is a transportable software. As soon as the .exe file is downloaed, you’ll be able to double click on it to begin the appliance. Insert your USB flash drive and choose it in YUMI consumer interface.

Then choose the identify of the OS you need to put into the USB. Subsequent, choose the ISO picture file out of your arduous drive. In step four, you possibly can select the persistent file measurement.

yumi uefi

After that, click on the create button to write the ISO picture file to your USB flash drive.

yumi multiboot

As soon as finished, repeat the identical course of add further ISO pictures information your USB flash drive. You can even add Windows ISO photographs. The Windows ISO will probably be put in Different OS and Tools within the Grub boot menu.

yumi multiboot usb

5 WinSetupFromUSB

WinSetupFromUSB is a Windows program that may create multiboot USB flash drive to set up any Windows variations since 2000/XP, boot numerous Linux and *BSD flavors.

WinSetupFromUSB Execs:

  • Helps each BIOS and UEFI firmware.
  • Can create a bootable USB containing each Linux and Windows ISO photographs (Windows 7, eight and 10)
  • You possibly can add further ISO pictures to your USB with out destroying earlier ISO photographs within the USB flash drive.
  • Helps persistent mode
  • Check your stay USB in QEMU.

Cons:

  • There’s no Linux model, though you’ll be able to attempt operating WinSetupFromUSB on Linux by means of WINE.

WinSetupFromUSB may be downloaded from the official obtain web page. As soon as it’s downloaded and put in, begin it from the beginning menu. Insert your USB flash drive. WinSetupFromUSB will routinely choose it.

Then you possibly can select to format it with FBinst. Subsequent, choose your Windows and Linux ISO picture information.

WinSetupFromUSB multiboot

Within the superior choices window, you possibly can select the persistent file measurement for Linux distributions.

WinSetupFromUSB persistent

As soon as you’re prepared, click on the Go button to begin create the multiboot USB. After all of your ISO pictures are written to USB flash drive. Restart your pc and boot from the USB drive.

multiboot USB grub4dos

That’s it! I hope this tutorial helped you create a multiboot USB flash drive. As all the time, when you discovered this publish helpful, then subscribe to our free publication to get extra ideas and tips. Take care ?

Fee this tutorial

[Total: 0 Average: 0]

(perform(d, s, id)
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = “//connect.facebook.net/zh_CN/sdk.js#xfbml=1&version=v2.8&appId=961591023917170”;
fjs.parentNode.insertBefore(js, fjs);
(doc, ‘script’, ‘fb-jssdk’));